wedgeloc4001006.jpg wedgeloc4003010.jpg
WEDGE-LOC CO, INC.
1580 PENDLETON DR. RIO RICO, AZ 85648
800.669.7218
FAX: 800.669.9334
 SALES@WEDGELOC.COM
Wedge-LocTM bracing hardware for T-posts is a family owned and operated business proving itself for over 20 years throughout North America and Europe. Our products are American made and dependable, made from the highest quality materials.
 
We understand your time is valuable and shouldn't be spent digging post holes and pouring concrete. With Wedge-Loc you only have to drive in the T-posts and install Wedge-LocTM hardware. No pounding or bolting parts together means minimal labor for you, and more free time!
Our site will give you all of the information you need to locate, purchase and use the Wedge-LocTM bracing system for all of your fencing needs. See below for tips on the many ways to use our unique one-of-a-kind products.

Bracing styles are based on your personal preference and individual needs. Typically customers find that the diagonal braces are all that they require. That's the best thing about Wedge-LocTM, you can build any type of bracing combination you want, it's your fence!
Mix and match diagonal & horizontal braces to customize your brace based on your individual needs. Use 7 or 8 foot T-posts for all of your corner and end posts so they get into the ground 2-3' like you would put a wooden post. We recommend using a diagonal brace coming off of any horizontal brace for strength & stability.
 
NOTE:  If you have a corner that is not square, and is running on a different angle, simply install two separate single diagonal braces in the direction of your fence line and wire the posts together.

YOU'LL NEVER HAVE TO DIG ANOTHER POST HOLE, POUR CONCRETE OR SET EXPENSIVE, HEAVY WOODEN POSTS!

ERECT A CORNER IN APPROXIMATELY 15 MINUTES OR LESS!

Now you can quickly and economically erect a corner with the bracing needed for tight stretched wire fencing using regular steel fence posts, commonly know as "T-posts".

Wedge-LocTM hardware fits all steel U.S., Canadian & Mexican T-posts and works with ALL types of fence material for both permanent and temporary fencing needs. The Wedge-LocTM collar will hold up to 4 sockets to let you build 2, 3 or 4 way corners. Start and finish a fence line or barricade fence anywhere! Build a fence for rotational grazing, temporary pastures, snow fence, trellising for fruit...virtually any kind of fence you want that needs to be braced.

Proven Durability
Wedge LocTM hardware was still intact and doing its job, following tests performed at the University of Arizona that proved the durability of Wedge-LocTM hardware. Test wires broke at 2900 lbs. of pull and the testing was stopped. (The average combined pull on a 4-strand 12.5 ga. wire fence is 500 - 700 lbs.)
wedgeloc4003005.jpg wedgeloc4003004.jpg
Proudly Made in the U.S.A
Bracing Hardware for T-Posts